Guide to Shop Hexagon Sound Panels in Toomel

Acoustical treatment materials can be roughly divided into sound absorption materials, diffusion materials and sound insulation materials according to their functions. Among them, the sound-absorbing material is not only the conventional sound-absorbing plate, but also the low-frequency trap which is usually used to absorb low frequencies. First of all, we need to know how the sound will continue to spread after it has spread to our common walls.







































Incident sound-reflected sound = sound absorption coefficient

Incident sound-transmitted sound = transmission loss

Some of the sound is absorbed by the wall and turned into heat energy.

From the above relationship, it is not difficult to find that sound insulation can only ensure as little transmitted sound as possible, but it does not necessarily have a good sound absorption effect.

sound absorbing material

Traditional sound-absorbing materials are porous materials, or the scientific name is acoustic resistance sound-absorbing materials. The essence of sound wave is a kind of vibration, exactly speaking, it is air vibration for the speaker system. When air vibration is transmitted to this sound-absorbing material, it will be gradually relieved by the fine pore structure and converted into heat energy.


















Generally speaking, the thicker the sound-absorbing material is, the more such small holes are in the direction of sound propagation, and the better the absorption effect of sound incident immediately or at a small angle is.

Diffusion material













When the sound is incident on the wall, some sound will exit along the geometric direction and continue to spread, but usually this process is not an absolute "specular reflection". If it is an ideal absolute reflection, the sound should exit completely in the geometric direction after passing through the surface, and the energy in the exit direction is consistent with the incident direction. The whole process does not lose energy, which can be understood as no diffusion at all, or more popularly as specular reflection in optics.

sound insulating material

The sound insulation and sound absorption properties of materials are different. Sound-absorbing materials often use the pore structure in the material. However, this pinhole structure usually leads to the transmission and propagation of sound waves. However, in order to prevent the sound from further transmitting from the material, it is necessary to reduce the cavity structure as much as possible and increase the density of the material.

Usually, the sound insulation performance of sound insulation materials is related to the density of materials. Buying high-density sound insulation materials can further improve the sound insulation performance of the room. However, the single-layer sound insulation material sometimes still has limitations. At this time, double-layer sound insulation treatment can be adopted, and additional damping materials can be added to the two-layer sound insulation material. However, it should be noted that the two layers of sound insulation materials should be avoided as much as possible to adopt the same thickness, so as to avoid repetition of coincidence frequency. If in the actual construction and decoration, the whole house should be soundproofed first, and then sound absorption and diffusion treatment should be carried out.

The front wall is decorated with perforated sound-absorbing board of ecological wood Great Wall as a rigid diffusion sound-absorbing structure for film appreciation. Irregular wood veneer is pasted on the pillars on both sides to reflect sound.

According to the acoustic sinking structure of the original beam ceiling, the top surface is decorated with fake beams, and the customized sound-absorbing wedge is hoisted inside the sinking to play the role of sound absorption and diffusion.

According to the final requirements of acoustic calculation, the side elevation is made of composite sound-absorbing structure and diffusion structure, all supporting pieces such as additional keels are irregularly designed for earthquake resistance, and the external decoration is made of polyester fiber sound-absorbing board.

Product feature editing














Toomel brand sound-absorbing wall panels not only achieve amazing technological breakthroughs, but also provide brand-new solutions to customers' customized needs. Introducing the manufacturing technology of S-shaped wall panels, the toomel brand integrates innovation and functionality into product design to provide European and American customers with a better sound-absorbing experience.

The emergence of this S-shaped wall panel allows traditional sound-absorbing wall panels to turn an invisible art into infinite possibilities. Its unique curved shape not only gives the wall a fashionable and modern feel, but also effectively absorbs and eliminates the reflection of sound waves, creating a quieter and more comfortable indoor environment. Toomel sound-absorbing wall panels not only provide excellent sound-absorbing effects, but are also known for their outstanding appearance. Through in-depth communication with European and American customers, we understand their pursuit of personalized customization, so we specially launch a variety of colors and decoration options to meet the needs of different customers. Whether it is an office, hotel, conference hall or home space, toomel's sound-absorbing wall panels can be perfectly integrated into it, adding a unique charm to the indoor environment. Toomel has always been driven by technological innovation and is committed to providing customers with the highest quality sound-absorbing solutions.

Through the introduction of S-shaped wall panels, we can better meet the customized needs of European and American customers, while providing the perfect combination of art and function.  Toomel's sound-absorbing wall panels not only make your space more attractive, but also bring unparalleled comfort and tranquility.